D1 Washing people

Washing people - bath, basin, tub and shower

COMMUNITY CHECK AND FIX

• Check that hot and cold water is available and pressure is okay (1) at the bath, basin, tub and shower and the hot water temperature is between 45°C and 60°C (2).
• Check taps (3), spouts (4) and shower roses (5) for leaks, organise a plumber to fix all leaks and consider replacing all washers regularly. 
• Check that the drains (6) are working and are not blocked or leaking; get a plumber to fix blockages or leaks.
• Replace missing plugs at the bath or basin.
• Check for signs of water leaks, decay, rot and rust in the walls, floors and cupboards; get a builder to inspect if there are problems.
• Check that the bath and basin are securely fixed to the wall or floor, and fix if loose.
• Install clothes hooks, towel rails and shelves if there are none available
• Check the door lock works and fix if necessary.
• Replace any missing or blown light bulbs.

TRADE TEST AND FIX

• Replace washers in taps, spouts and shower roses, and reseat taps if required.
• Inspect for possible water leaks or failure of waterproofing to prevent structural failure.